Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TECHNICAL DATA
Cordless Angle Grinder
Production code
Battery voltage
Rated speed
D= Grinding disc diameter max.
d= Grinding disc hole diameter
b= Cutting disc thickness min. / max.
b= Grinding disc thickness max.
D= Sanding disc diameter max.
D= Wiring brush diameter max.
Thread of work spindle
GB
Weight according EPTA-Procedure 01/2014 (Li-Ion 2,0 Ah...5,5 Ah...12,0 Ah)
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Surface grinding (Li-Ion 1,5 Ah): Vibration emission value a
Uncertainty K=
Disc sanding (Li-Ion 1,5 Ah): Vibration emission value a
Uncertainty K=
For other applications, e.g. Abrasive Cutting-O Operations or Wire Brushing other vibration values could occur.
WARNING for Vibration!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for di erent applications,
with di erent accessories or poorly maintained, the vibration emission may di er. This may signi cantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is
running but not actually doing the job. This may signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.
English
16
M18 FHSAG125XB
469 710 02 ...
... 000001-999999
18 V
9000 min
125 mm
22,2 mm
1 / 3 mm
6 mm
125 mm
100 mm
M 14
2,8 kg...3,4 kg...3,9 kg
-18°C ... +50°C
M18B...
M18HB...
M12-18
M1418
82,98 dB(A)
93,98 dB(A)
6,57 m/s
h,AG
1,5 m/s
2,27 m/s
h,DS
1,5 m/s
M18 FHSAG150XB
469 733 02 ...
... 000001-999999
18 V
9000 min
-1
150 mm
22,2 mm
1 / 3 mm
6 mm
150 mm
100 mm
M 14
2,9 kg...3,5 kg...4,0 kg
-18°C ... +50°C
M18B...
M18HB...
M12-18
M1418
82,98 dB(A)
93,98 dB(A)
9,7 m/s
2
2
1,5 m/s
2
2
1,96 m/s
2
2
1,5 m/s
2
2
-1
Werbung
