Velleman CAMIP5N1 Schnelleinstieg Seite 7

When logging in as an administrator or operator, you will a window like the one below:
Notes:

A visitor will see this window without the camera controls.

The Device Management settings are only availble for an administrator.

The functions and layout of the surveillance tool vary depending on the browser you are using.
The camera controls are
Option
OSD (= on-screen display)
Add OSD on record
Resolution
Mode
Fps
Brightness
Contrast
Preset – Set - Go
Default all
V. 04 – 04/06/2015
All manuals and user guides at all-guidesbox.com
CAMIP5N1
Use
Select the number of cameras you want to display
simultaneously (1, 4 or 9).
To learn more about setting up multiple cameras, please refer
to the full manual on the cd included in the package.
Show or hide the camera name on the display.
Show or hide the camera name when recording.
Select a resolution from the list.
Select a refresh rate from the list.
Select a frame per second setting from the list.
Set the brightness with the
Set the contrast with the
You can set a pre-defined location with the Preset function.

To set a location:
Select a number from the list and click Set.
The system will save the preset.

To use a location you have preset:
Select it from the list and click Go.
Reset all settings to their default values.
7
and buttons.
and buttons.
©Velleman nv