Lennox SWING Bedienungsanleitung Seite 6

OPERATION ATTENTION
Read the owner manual book seriously before operating and mastering the mastering the
main points. Please consult the local dealer in difficulty.
The air conditioner is designed to supply comfortable room circumstance. It is only used for
the purpose according to the manual book.
1. Check before operating
• Check if the ground wire is broken or not connected.
• Check if the air filter is attathed well.
• If the unit has not been used for a long time, it is recommended to clean the air filter
before you using the unit. For continuous use, clean the air filter at least once every
two weeks.
2. Safty caution
• Do not humidify the indoor unit and remote controller.
• Otherwise, it will cause electric shock or fire.
• Do not use or place flammable gas or liquid such as fixature, paint or benzine near
the air Conditioner.
• Do not touch the louver when it runs.
• Otherwise, your finger will be clamped or the drive parts will be broken.
• When the fuse blow, do not replace it with the unsuitable fuse or other wire.
• If the fuse is replaced with brass or iron wire, it will cause air conditioner damaged or
fire.
• Do not insert any stick into the outlet or inlet.
• When the wheel runs in high speed, it is very danger that fan hits anything else.
• Do not remove the fan cover of outdoor unit.
• It will be danger that the fan runs in high speed without the cover.
• Do not turn on / off the the air conditioner by main power switch, please control the air
conditioner by the on / off button on the remote controller.
• Do not let the kid play the units.
• Do not server the air conditioner yourself.
• Please commit server operation to the specified service person.
• Switch off the main power before cleaning filter net and machine body. Although it will
not cause electric shock when replacing and cleaning the filter net, cleaning the
machine body with dry cloth normally with the double protection from accident electric
shock, for the absolute safety of users, routine maintenance should be carried on
after switching off the power.
3