Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
Open the air-in grill
Push the grill switthes towards the middle simultaneously as indicated in sketch A. Then
pull down the air-in grill.
2.
Take out the air-in grill.
3.
Dismantle the air filter
4.
Clean the air filter (Vacuum cleaner or pure water may be used to clean the air filter. If
the dust accumulation is too heavy , please use soft brush and mild detergent to clean it
and dry out in cool place) .
Fig. 1
• The air-in side should face up when using vacuum cleaner. (See Fig. 1)
• The air-in side should face down when using water. (See Fig. 2)
Cautions : Do not dry out the air filter under direct sunshine or with fire.
5.
Re-install the air filter
6.
Install and close the air-in grill in the reverse order of step 1 and 2 and connect the
control box cables to the corresponding terminators of the main body.
Fig. 2
12
Werbung
