Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions Booster WA 121545
7.7
16
All manuals and user guides at all-guides.com
Sensor for
Temperature sensor for
leisure area battery
leisure area battery
+
--
1
2
3
Fig. 10
Temperature sensor: Connection
Connect the battery sensor cables to the leisure area and starter batte-
"
ries.
Connect the battery sensor cables to the booster as in Figure 10.
"
If voltage sensor cables and the temperature sensor are connected, the
Y
settings required for the evaluation of the measuring signals are perfor-
med automatically in the booster.
Therefore, the battery voltage sensor cables may only be connected to
the booster. A loop from the booster to other devices, or a tap of the si-
gnal between the fuse and the booster is not permissible.
ATTENTION!
Y
If the cables of the voltage sensor for the leisure area battery are connected
incorrectly or with the wrong polarity:
the booster has no function.
F
a current of about 40 mA flows continually from the starter battery.
F
The battery will discharche.
a current of about 80 mA flows continually from the leisure area bat-
F
tery. So if the vehicle remains stationary, the battery will discharge
totally and might suffer damage as a result.
If sensor cables and the temperature sensor are connected, the settings
Y
in the booster required to interpret the measurement signals are configu-
red automatically.
Finishing installation work
ATTENTION!
Y
2
2
The 10 mm
and 16 mm
cables to the batteries are relatively heavy and
potentially exert high loading on the plug connectors.
The cables must be secured with suitable strain relief so that no high ten-
"
sile forces or pressure loads are exerted onto the plug connectors of the
booster.
Insert the fuses into the fuse holders (refer to Sections 7.2 to 7.4 for the
"
fuse ratings).
Fix the locking screw of both high current plugs ("starter battery" and "lei-
"
sure area battery" connections).
Date: 21.09.2017
4 (GND)
1
Battery
+
sensor
Starter
2
battery
--
8200510 BA / EN
Werbung
