Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
7.5
2
16 mm
70 A
1 A
+
Starter
battery
Battery 1
Voltage sensor
7.6
8200510 BA / EN
Operating Instructions Booster WA 121545
Booster connector for directly on batteries with additional
chargers
2
16 mm
2 A
--
D+
G
B+
B- -
Generator
Fig. 9
Vehicles without Schaudt EBL - - direct connection to batteries
Connecting the temperature and battery sensor (optional)
The booster is able to control charging of the leisure area battery by tempe-
rature. The optional temperature sensor is required for this.
This function is enabled automatically when the battery temperature sensor
is connected.
Connect the temperature sensor to the negative terminal of the leisure
"
area battery.
Route the temperature sensor cable through the vehicle to the booster.
"
Plug the connector into the booster (Figure 10, Pos. 1).
"
Date: 21.09.2017
+ WB
- - GND
+ SB
2
16 mm
50 A
to
80 A
1 A
+
--
Leisure area
battery
Battery 2
Temperature and voltage sensor
Alternative:
Input
additional charger (e.g. solar)
Output
Voltage sensor SB
"Bypass" switch in "Off"
position (see Section 8.4.4)
Set the maximum output
current ("Max. Output")
appropriate for the fusing
(see Section 8.4.3).
Temperature sensor
15
Werbung
