Tele Radio T60RX-01APL Bedienungsanleitung Seite 4

All manuals and user guides at all-guides.com
Codes/Erase
T60RX-01APL
T60RX-03ADL
Normally all controls are supplied with the same standard code, which means
all transmitters can operate all receivers.
It is important that the transmitter and receiver to be used are coded
together with an unique code. Coding is done using respective code switches
on the transmitter.
NOTE!
The receiver does not have code switches (system T60). It automatically
programs the transmitter's unique code.
See "program the receiver"
The code switches consist of 10 three way switches ("+", "0", "-").
When using the 460 system the code switches 1-8 are used and it is possible
to choose between 6,561 codes.
On the T60 system, the code switches 1-10 are used and it is possible to
choose between 59,049 codes.
The T60 system has 16,777,216 individual codes. Each transmitter is supplied
with a unique code (Private ID code)
Erase the programmed codes.
- Press the self-teach button (more than 6 sec) until the red LED goes out.
4 5