Tele Radio T60RX-01APL Bedienungsanleitung Seite 21

All manuals and user guides at all-guides.com
Co-programming the transmitter and receiver
Supplement for the 460 system
Type 460-93 transmitter
T60TX-15DML
Program as follows.
1. Check that the transmitter's system switch (A) is in position 1 (OFF).
2. Check that the code switch (B) 9 is in the + (plus) position.
3. Set an identical code on the transmitter's 3 fi rst switches (code switches
1-3) as set on the receiver (code switches 4-8 are not used).
4. Check that the relay switches when one of the transmitter's buttons is
pressed in.
See the code table 460-93 page 26-31
NOTE!
When you select the door on the T60TX-15DML transmitter, a
combination of the fi rst digit + the last two digits is entered when it
works together with a 460-93 transmitter.
For example, if you want to operate door A2 as set out in table A, then
enter the combination 102, to operate door D3 as set out in table D,
enter the combination 403, etc.
20 21