Tele Radio T60RX-01APL Bedienungsanleitung Seite 20

All manuals and user guides at all-guides.com
Co-programming the transmitter and receiver
Supplement for the 460 system
Type 401RVL9 and 403RVL9 with knob 0-15
T60TX-15DML
Program as follows.
1. Check that the transmitter's system switch (A) is in position 1 (OFF).
2. Check that the code switch (B) 9 is in the - (minus) position.
3. Set code switch 10 to either the minus or plus position depending on whether
you are using A or B coding on the old transmitter. (robust transmitter)
4. Set an identical code on the transmitter's 4 fi rst switches (code switches 1-4)
as set on the receiver (code switches 5-8 are not used).
5. Check that the relay switches when one of the transmitter's buttons is pressed in.
See the code table 1-15 page 25
20 21