IFM Electronic efector200 OL Bedienungsanleitung Seite 9

Programming the output function
1
Press for 10s.
Operation
Check the safe functioning of the diffuse reflection sensor. Display by LED's.
LED green
LED yellow
LED red
LED's
yellow + red
Maintenance
Keep the plastic lenses of the sensor free from soiling.
For cleaning do not use any solvents or cleaning agents which could damage the
plastic lenses.
All manuals and user guides at all-guides.com
The red LED starts to flash fast after 2 s.
Then the yellow and green LED's flash
alternately. After 8 s all LED's go off, the
output function has changed from light-
on mode to dark-on mode (or vice versa).
unit is ready for operation
output is switched
error in object detection,
e.g. maladjustment, soiling of the lenses
flashing alternately, 2Hz: output short-circuited
flashing alternately, 1Hz: internal malfunction
(output is not switched)
9