Piaget Altiplano High Jewelry Bedienungsanleitung Seite 8

1208P
EXPLANATION OF THE FUNCTIONS
WINDING THE MOVEMENT
Self-winding watches are wound by the movement of the wrist when the watch is worn. If the
watch has not been worn for around 44 hours, wind it by hand with the crown in position 0,
that is, turn the crown in the clockwise direction (around 10 turns of the crown are sufficient
to restart the mechanism).
SETTING THE TIME
Pull the crown out to position 1, then turn it clockwise or anti clockwise to position the
hands. The mechanism is equipped with a stop-second device. Pulling the crown will stop
the movement, allowing you to set time precisely. Make sure the last turn of the crown is
in the clockwise direction. Push the crown back to position 0 after the adjustment.
1 2
ULTRA-THIN SELF-WINDING MECHANICAL MOVEMENT,
SMALL SECONDS
60
1 3
0 - 1
C L O C K W I S E
A N T I C L O C K W I S E
S M A L L S E C O N D S