Setting Up The Bbq; Before Grilling - tepro TORONTO BASIC Bedienungsanleitung

Step 19
Step 20
Important: All screws must be
tightly fastened.
P20094-TEPRO_1163_Toronto_basic_DE_GB_20200918.indd 25

Setting up the BBQ

Attention Risk of damage!!
During use, the screws can
loosen slowly and impair the
BBQ's stability..
– Check the stability of the screws prior
to each use. If necessary, tighten all of
the screws again to ensure the BBQ is
standing securely.
– When using the grill, please protect the
floor and surrounding walls from possib-
le soiling e.g. through grease splashes.
• Before use, place the BBQ on an even,
sturdy surface outdoors.

Before grilling

• Prior to first use, wash the BBQ grate
and the warming grille with warm
soapy water.
• Pre-firing
Before you use the BBQ for the first
time, it needs to be conditioned (pre-
fired) for at least 1-2 hours at a tem-
perature of 100 °C- 200 °C.
This is necessary in order to make the
inside ready for barbecuing and to burn
in the heat-resistant paint on the out-
side. During the pre-firing, the cover
should not be completely closed. Only
close the cover completely for a few
minutes at the end.
Attention: During the pre-firing, the
temperature must not exceed 260 °C.
t
25
18/9/2020 5:12 PM