Xetron LMG-10 X Benutzerhandbuch Seite 10

3.5 Settings (SET)
3.5.1 Units
Set the temperature unit
1.Long press the
2.Press the or
If only set the temperature unit, just long press
Set the pressure unit
1.Press button in the setting interface to set the pressure unit.
MODE
2.Select the pressure unit by pressing
If only set the pressure unit , long press
FIG. 7 Temperature Unit Setting Interface
3.5.2 Auto Off
1.In any mode, long press the
2.Short press the
The default power-off time is 15 minutes.
3.Press or
[ FIG.9 ].
Turn off the automatic power-off function[ FIG.10 ]
Turn on the automatic power-off function
FIG. 9 Automatic Shutdown Interface
key in any mode interface to enter the unit SET interface.
MODE
key briefly to switch the temperature unit [ FIG.7 ].
key to enter the unit SET interface.
MODE
key twice to switch to the automatic power-off setting[ FIG.9 ].
MODE
key briefly to set the automatic power-off time (5, 10, 15, 30, or 60 min)
key after switching the unit and exit the setting.
MODE
or button.
key after switching the unit and exit the setting.
MODE
FIG. 8 Pressure Unit Setting Interface
FIG. 10 Automatic Shutdown and Opening Interface
8