Herunterladen Diese Seite drucken

Samsung MC28A5185 Serie Bedienungsanleitung Seite 38

Vorschau ausblenden Andere Handbücher für MC28A5185 Serie:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Sparking and cracking occur inside the oven (arcing).
• Have you used a dish with metal trimmings?
• Have you left a fork or other metal utensil inside the oven?
• Is aluminum foil too close to the inside walls?
Smoke and bad smell when initial operating.
• It's a temporary condition by new component heating. Smoke and smell will
disappear completely after 10 minutes operation.
To remove smell more quickly, please operate microwave oven with putting lemon
formation or lemon juice in the cabinet.
If the above guidelines do not enable you to solve the problem, then contact your
local SAMSUNG customer service centre.
Please have the following information read;
• The model and serial numbers, normally printed on the rear of the oven
• Your warranty details
• A clear description of the problem
Then contact your local dealer or SAMSUNG aftersales service.
MC28A5185CK-SW_DE68-04699D-00_EN+DE+FR+IT.indb 38
MC28A5185CK-SW_DE68-04699D-00_EN+DE+FR+IT.indb 38
ERROR CODE
"SE" message indicates.
• Clean the keys and check if there is water on the surface around key. Turn off the
microwave oven and try setting again. If it occurs again, call your local SAMSUNG
Customer Care Centre.
"E-12" message indicates.
• The "E-12" message is Gas Sensor Short. This error may occur because of the high
humidity in the cavity when you operate the microwave oven once again shortly
after the previous operation of microwave oven for some food is finished. In this
case, because there is a possibility that the Gas Sensor is not out of order turn off
the microwave oven and try setting again. If this error occurs again, call your local
SAMSUNG Customer Care Centre.
"E-24" message indicates.
• Before the microwave can overheat, the "E-24" message appears on the display.
If the "E-24" message appears, press the STOP/ECO key to utilize the initialization
mode. After the oven cools, try operating the oven. If the "E-24" message appears
again, contact your local Samsung Customer Care Centre.
For any codes not listed above, or if the suggested solution does not solve the
problem, contact your local SAMSUNG Customer Care Centre.
English - 38
2021-02-08 오후 8:50:23
2021-02-08 오후 8:50:23

Werbung

loading