Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Contents
7.1
MAINTENANCE INTERVALS
CAUTION!
Please observe the following maintenance intervals to ensure a continuous trouble-free
and reliable functioning of the machine. Non-observance can invalidate liability and any
warranty claims.
The specified maintenance intervals are valid for normal operating conditions.
Æ
For intensive use, reduce the maintenance intervals.
Æ
Immediately rectify any malfunctions and failures detected, see
on page
Æ
We recommend to document all maintenance work.
DURING EACH OPERATION
Æ
Check for damage, leakages, unusual operating noises, etc.
Æ
Remove dust and dirt at regular intervals; dispose of scraps in an environmentally friendly manner.
WEEKLY
Clean tools and all externally accessible machine parts thoroughly, see
Æ
page
64.
Lubricate the hydraulic cylinder and the punching tools, see
Æ
Lubricate mobile machine parts if necessary.
Æ
Check the quality and quantity of the hydraulic oil, see,
Check the machine for proper condition:
Æ
ɚ
When idling, listen for unusual noises from the pump, motor, clutch, suspension.
ɚ
Check all components and joints of the hydraulic system for leakages.
ɚ
Check electrical connections and control elements for damages and proper functioning. This also
applies in particular to the safety components, see
ANNUALLY
Æ
Have an inspection carried out, including the following checks and, if necessary, repair work:
ɚ
Replacement of wear parts on safety and functional components.
ɚ
Inspection of punching tools and tool holders.
ɚ
Inspection of electrical equipment.
© 1 1-2023, Modifications subject to change.
69.
"7.4 Trouble-Shooting"
"6.5 Machine Cleaning" on
"7.2.2 Lubricants" on page
"7.2.1 Hydraulic Oil" on page
"3.4 Safety Devices" on page
68.
66.
50.
EN
65
Werbung
