Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RECORDING
@ Recording from CD without edit pause func-
@ Pause button
tion
The pause button can be used to temporarily stop the tape
1. Press the operation switch to turn on the unit, press the
from moving during recording or playback.
CD eject button to insert the CD, and then press the eject
Before beginning a recording, first press and lock the pause
button of the deck 1 to insert the recording tape.
button. Then, press the record button. (The tape will not
2. Press the record button after both the total number of
move.) When ready to record, press the pause button to
tracks and total playing time appear on the display panel.
release it. This will start tape movement
for immediate
The recording and disc play will begin.
recording.
Do not use the search mode during recording. Monitor
sound will be also recorded.
Note:
=
:
:
Do not use the pause button to stop the tape for a
g
@ Recording radio broadcasts
long period of time.
mac
1. Follow the procedure described in "RADIO".
wi
2. Insert the recording tape into the cassette compartment
Pa
1.
™ Monitoring
3. Press the record button.
The monitor system enables you to listen, through the
Recording will begin.
speakers or headphones, to the sound as it is being re-
To stop the recording, press the sfop/eject button.
corded.
The "tailored" frequency response, as set by the XBS
If it is necessary to adjust the volume level of the sound
and graphic equalizer, is not recorded onto the tape. This
being monitored, do so by using the volume control.
allows you to listen to the tape on different systems and
in different environments, and still be able to tailor the
playback frequency response of the tape.
Note:
If an mixing microphone is placed too close to the
speakers, feedback (howling) may be heard. If so,
place the microphone as far away from the speakers
as possible, or reduce the volume.
How to use the FM mode/beat proof button
When an MW/LW broadcast is recorded, the FM mode/beat
proof button can be used to reduce unwanted "beat" signals
(whistle) which are sometimes present. Press the button to
whichever position (MW: BP 1, BP 2 or BP 3/LW: BP 1, BP 2
m Erasure of recording
or BP 3) best reduces these "beat" signals.
When recording, previously recorded signals on the tape will
be erased automatically.
™ Automatic recording level
To erase a tape without re-recording, use the following pro-
This unit has an automatic level control (the recording level
cedure.
.
;
is automatically adjusted).
1. Press the operation switch to turn on the unit.
2. Press the "TAPE" button of the function select buttons.
3. Insert the tape to be erased.into the deck 1 by pressing
the stop/eject button.
4. Press the record button.
Werbung
