Panasonic RX-DT610 Bedienungsanleitung Seite 16

HSIIDNA
@ Skip play
Press one of skip/search buttons momentarily until the
desired track has been located during disc play.
When you wish to listen from the beginning of the
track being played...
Press the Kd<4/<4< button once.
For example, if you press the Ké<4/<4<4 button while the track
3 is being played, the disc will be played from the beginning
of the track 3.
eWhen you wish to skip the track being played and
listen to the next track...
Press the > /PP button once.
For example, if you press the > P>/PP button while the track
3 is being played, the disc will be played from the beginning
of the track 4.
When you wish to skip several tracks...
Repeatedly press the skip/search button. (Check the track
number on the display.)
During programmed play
The tracks are skipped in the programmed sequence.
M@ Search play
While watching the track and time displays, press and
hold one of the skip/search buttons during disc play.
Release the button when the desired point has been
reached.
>P/PPI: Pickup moves forward.
Kd</<4<4: Pickup moves backward.
The pickup moves slowly at first and then rapidly if the
button is held down for more than about three seconds.
Notes:
During program play, you can only search the track
being played.
elf you release the button immediately, the unit will
go into the skip play.
@ Repeat play
This function repeats playing ail of the tracks.
In the program play mode, the tracks are played again in the
programmed sequence.
Press the repeat button and then press the play/pause
button.
The repeat indicator appears on the display.
Repeat indicator
ePlaying one track through again
First select the track with the program play mode, press the
repeat button and play/pause button.
eClearing the repeat play function
Press the repeat button again.
(The repeat indicator goes out.)