Technical Data; Information Regarding Article 33 In Reach - Atlas Copco Lzb22-Rl-Av036-50 Sicherheitshinweise

LZB22-RL-AV036-50

Technical data

Technical data
Ordering No
Model
Air consumption at free
speed
Air consumption at free
speed
Air consumption at max out-
put
Air consumption at max out-
put
Braking torque
Braking torque
Built in brake
External parts material
Free speed
Max output
Max output
Min starting torque
Min starting torque
Ratio
Rotation direction
Shaft loading code
Shaft type
Speed at max output
Stall torque
Stall torque
Torque at max output
Torque at max output
Vane type
Weight
Weight
Inlet hose
Inlet hose
Outlet hose
Outlet hose
Declarations
EU DECLARATION OF INCORPORATION
We, Atlas Copco Industrial Technique AB, SE-105 23
STOCKHOLM SWEDEN, declare under our sole responsi-
bility that this product (with name, type and serial number,
see front page) fulfils the following essential requirements of
Machinery Directive 2006/42/EC:
2006/42/EC (Annex I, clauses 1.1, 1.2 (excluding 1.2.4.3),
1.3, 1.4, 1.5, 1.6, 1.7)
This partly completed machinery must not be put into service
until the final machinery into which it is to be incorporated
has been declared in conformity with provisions of the Ma-
chinery Directive 2006/42/EC, where appropriate.
8411020772
LZB22-RL-AV036-50
l/s
cfm
5.3 l/s
11.2 cfm
Nm
ft lb
No
Stainless steel
3550 r/min
0.27 kW
0.36 hp
3.1 Nm
2.3 ft lb
Counterclockwise
b
Customer special
1170 r/min
3.2 Nm
2.4 ft lb
1.6 Nm
1.2 ft lb
Lubrication free
0.63 kg
1.39 lb
8 mm
0.25 in
10 mm
0.5 in
© Atlas Copco Industrial Technique AB - 9836 7813 00
The following (parts/clauses of) European harmonized stan-
dards have been applied:
DIN EN ISO 12100:2010
The relevant technical documentation was compiled and was
communicated in accordance with Machinery Directive
2006/42/EC part B of Annex VII. Authorities can request the
technical file in electronic form from:
Product Compliance Manager, Atlas Copco Industrial Tech-
nique AB, SE-105 23 Stockholm Sweden
Stockholm, 1 December 2021
Carl von Schantz, Managing Director
Signature of issuer
Regional Requirements
WARNING
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to
https://www.p65warnings.ca.gov/

Information regarding Article 33 in REACH

The European Regulation (EU) No. 1907/2006 on Registra-
tion, Evaluation, Authorization and restriction of Chemicals
(REACH) defines among other things requirements related to
communication in the supply chain. The information require-
ment applies also to products containing so called Substances
of Very High Concern (the "Candidate List"). On 27 June
2018 lead metal (CAS nr 7439-92-1) was added to the Candi-
date List.
In accordance with the above this is to inform you that cer-
tain mechanical components in the product may contain lead
metal. This is in compliance with current substance restric-
tion legislation and based on legit exemptions in the RoHS
Directive (2011/65/EU). Lead metal will not leak or mutate
from the product during normal use and the concentration of
lead metal in the complete product is well below the applica-
ble threshold limit. Please consider local requirements on the
disposal of lead at product end of life.
UK DECLARATION OF INCORPORATION
We, Atlas Copco Industrial Technique AB, SE-105 23
STOCKHOLM SWEDEN, declare under our sole responsi-
bility that this product (with name, type and serial number,
see front page) fulfils the following essential requirements of
The Supply of Machinery (Safety) Regulations 2008 S.I.
2008/1597:
S.I. 2008/1597 (Annex I, clauses 1.1, 1.2 (excluding 1.2.4.3),
1.3, 1.4, 1.5, 1.6, 1.7)
Safety Information
3