Setting Up The Mini Drone On The Hydrofoi1; Switching On The Minidrone; Compatibility - Parrot NEWZ Benutzerhandbuch

Setting up the Mini Drone on the Hydrofoil
Before setting up the Mini Drone, assemble the Hydrofoil and check the battery has
been installed correctly.
1. Insert the front of the Mini Drone in its support, the head facing the front of the
Hydrofoil. Ensure that the two front lugs on the support are inserted into the
front arms of the MiniDrone (photo A).
2. Fasten the clip on the rear of the Mini Drone (photo B).
Switching on the MiniDrone
Insert the battery into the slot or press the On/Off button
underneath the MiniDrone.
Then place your MiniDrone on a flat surface so it can
complete its initialisation phase.
The eyes of the MiniDrone will turn red, amber, and then
green.
Compati bi I ity
You need a smartphone or tablet that supports
Bluetooth®
4.0 to use the
Mini Drone.
For more information, go to the Compatibility page on our website.
6 Before getting started