Genius Nicer Dicer Smart Gebrauchsanleitung Seite 19

ATTENTION!
Clean the product immediately after use to avoid the build-up of germs or mould.
Dismantle the product before cleaning.
„
Do not use sharp or abrasive cleaning agents or cleaning pads.
„
Allow all parts to dry thoroughly before putting them away.
„
All parts without blades can be cleaned in the top basket of the dishwasher. Select an economy or standard programme.
„
Avoid high-temperature programmes (such as sanitising or pot/ pan cycles).
We recommend hand-washing any parts that contain blades (e.g. blade inserts, slicer insert) to preserve quality and
„
sharpness over the long term.
Note: Some types of fruit and vegetables can stain the plastic parts (e.g. beets). Frequent cleaning of the
collecting container in a dishwasher can affect the material's transparency. This is normal and not a cause for
concern; it does not limit the functionality.
Cleaning the blade inserts
When you're cleaning the product, never touch the side with the sharp blades.
If food residue gets stuck between the blades, turn the sharp side down and carefully remove them with a dish washing brush.
Self-cleaning function
7 Disposal
In the event that the product and/or accessories can no longer be used, they should be disposed of with the household rubbish.
It can be disposed of by the municipal waste management services.
The packaging material can be recycled. Dispose of the packaging in an environmentally friendly way and take it to your
recycling site.
If you have any questions about the device or spare parts/accessories, please contact your local retailer.
Instruction Manual
To clean the built-in pin block, press the 'Push' button on the top of the cutter top.
The built-in cleaning sieve is automatically pushed downwards and removes even
small pieces of food residue from the pin block.
The lid should remain open during this process. If the self-cleaning process is
launched when the cutter top is closed, there must not be any blade inserts in the
frame.
GB
19