Hyundai HB1000 Bedienungsanleitung Seite 25

• WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of
the appliance.
• All text in other languages and pictures shown on the packaging, or the product itself, are
translated and explained at the end of this language mutation.
• The producer does not undertake any responsibility for damage caused by improper use of
the appliance and the accessories (e.g. food deterioration, injury by knife edge, fire, etc.)
and its guarantee does not cover the appliance in the case of failure to comply with the safety
warning above.
DESCRIPTION OF THE CONTROLS (FIG. 1)
P1 Motor unit
P2 Switch I - speed 1
P3 Switch II Turbo
P4 Speed regulator
P5 Adapters blocking buttons
P6 Hanging loop
P7 Power cord
P8 Blender stick
INSTRUCTION FOR USE
Remove all the packing material and take out the drive unit and the accessories. Remove all
possible adhesion foils, stick–on labels or paper from the appliance. Before the first use, wash
the parts that will be in contact with food in hot water with a detergent, rinse them thoroughly
with clean water and wipe till dry, or let them dry.
Safety switch (P2, P3)
Button I – low speed
By pushing and holding the button you will start the appliance and by releasing the button you
will switch off the appliance.
Speed regulator (P4)
By turning the regulator you can continuously change the speed of the motor revolutions.
ACCESSORY INSTALLATION
Slide adapter to drive unit and secure it by slight pushing till the blocking snaps in (Fig. 2). For
removing the mixer, push the blocking button P5 and remove the adapter.
HOW TO USE THE HAND BLENDER
The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby
food as well as for mixing and milkshakes.
1) The steps to install the blender P8 stick are described in "Accessory Installation".
2) Introduce the hand blender in the measuring bowl. Then press the control switch level I or
the switch level II (turbo). The maximum time of processing is 60 sec. Then wait for 1 – 5
minutes, which is necessary for the drive unit to cool down.
3) You can use the hand blender in the measuring bowl and just as well in any other vessel.
When blending directly in the saucepan while cooking take hand blender from overheating.
4) Turn the blender stick off the motor unit after use.
Recommendation
– It is recommended to cut tough ingredients into small pieces of about 2 x 2 x 2 cm. Do not
process very hard materials (e.g. ice cubes, etc.). The knife would be blunt soon.
– Hard ingredients (e.g. legumes, soya beans, etc.) should be soaked in water before processing.
– The longer you process the food with the mixer, the smoother the result will be.
P9 Measuring bowl
P10 Container lid
P11 Blade gear box adapter
P12 Blade
P13 Chopper bowl
P14 Whisk gear box adapter
P15 Whisk
Button II – maximum speed
(FIG. 2)
23 / 40
ENG