Tascam MA-BT240 Bedienungsanleitung Seite 10

Beware of condensation
Condensation could occur if the unit is moved from a cold
place to a warm place, it is used immediately after a cold
room has been heated or it is otherwise exposed to a sudden
temperature change. To prevent this, or if this occurs, let the
unit sit for one or two hours at the new room temperature
before using it.
Cleaning the unit
Use a dry soft cloth to wipe the unit clean. Do not wipe with
chemical cleaning cloths, thinner, alcohol or other chemical
agents. Doing so could damage the surface or cause discoloration.
About TASCAM customer support
service
TASCAM products are supported and warrantied only in their
country/region of purchase.
To receive support after purchase, on the TASCAM Distributors
list page of the TEAC Global Site (https://teac-global.com/),
search for the local company or representative for the region
where you purchased the product and contact that organization.
When making inquiries, the address (URL) of the shop or
web shop where it was purchased and the purchase date are
required. Moreover, the warranty card and proof of purchase
might also be necessary.
10
TASCAM MA-BT240
Bluetooth® overview
This unit has a built-in Bluetooth 5.1 audio receiver, and can
output sound played on a computer or portable audio device
that supports Bluetooth (Bluetooth device).
ATTENTION
The Bluetooth function of this unit is not guaranteed to
enable connection or operation with all Bluetooth devices.
Profiles
This unit supports the following Bluetooth profiles.
o A2DP (Advanced Audio Distribution Profile)
o AVRCP (Audio/Video Remote Control Profile)
In order to transfer audio by Bluetooth, the Bluetooth device
must support A2DP.
In order to control playback on the Bluetooth device, it must
support AVRCP.
Even if a Bluetooth device supports the same profiles, though,
its functions might differ according to its specifications.
Codecs
This unit supports the following A2DP codecs. It will automatically
select one of them during audio transfer.
o SBC
o AAC
The unit will select the appropriate A2DP codec to use
according to the codec compatibility of the other Bluetooth
device and communication conditions.
NOTE
o The A2DP codec to be used cannot be selected by pressing
a button, for example.
o Due to characteristics of Bluetooth wireless technology,
playback from a Bluetooth device will be slightly delayed
compared to playback from this unit.
Content protection
This unit supports SCMS-T as a form of content protection
when transmitting audio, so it can play protected audio.
Transmission security
This unit supports security functions during Bluetooth
transmission in accordance with the Bluetooth standard
specifications, but it does not guarantee the privacy of such
transmissions.
TEAC Corporation will bear no responsibility should an
information leak occur during transmission by Bluetooth.