Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Care and cleaning
Warning! Refer to Safety chapters.
General information
•
Clean the hob after each use.
•
Always use cookware with clean bottom.
•
Scratches or dark stains on the surface have no
effect on how the hob operates.
•
Use a special cleaner applicable for the surface of
the hob.
•
Use a special scraper for the glass.
Cleaning the hob
•
Remove immediately: melted plastic, plastic foil,
sugar and food with sugar. If not, the dirt can cause
Troubleshooting
Warning! Refer to Safety chapters.
What to do if...
Problem
You cannot activate or operate the
hob.
Residual heat indicator does not
come on.
If you cannot find a solution...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
Give the data from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the corner of the
glass surface). Make sure, you operated the hob
damage to the hob. Take care to avoid burns. Put
the special scraper on the glass surface at an acute
angle and move the blade on the surface.
•
Remove when the hob is sufficiently cool:
limescale rings, water rings, fat stains, shiny metallic
discoloration. Clean the hob with a moist cloth and
non-abrasive detergent. After cleaning, wipe the hob
dry with a soft cloth.
Remove shiny metallic discoloration: use a
•
solution of water with vinegar and clean the glass
surface with a moist cloth.
Possible cause
The hob is not connected to an
electrical supply or it is connected
incorrectly.
The fuse is blown.
The zone is not hot because it op-
erated only for a short time.
correctly. If not the servicing by a service technician or
dealer will not be free of charge, also during the
warranty period. The instructions about the Service
Centre and conditions of guarantee are in the guarantee
booklet.
Remedy
Check if the hob is correctly connec-
ted to the electrical supply. Refer to
the connection diagram.
Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
If the zone operated sufficiently long
to be hot, speak to an Authorised
Service Centre.
17
Werbung
