Pekatherm U20T Gebrauchsanleitung Seite 31

All manuals and user guides at all-guides.com
1) Plug the product into the mains socket, making sure your mains' specifications
correspond to those of the product stated on the label.
For products with detachable control unit, first connect the power cord to the product
and then to the mains socket.
For detachable products, use only the control unit originally provided with the product.
2) If everything is correct, only digital dot remains lit on the digital display indicator on the
control unit (heating function is not active yet).
3) Push the ON/OFF button on the control unit to switch on the product. Digital display
shows default temperature setting.
4) Proceed to adjust the temperature among the four available settings by pushing the
temperature button on the control unit. In the same way, adjust your desired
AUTO-OFF time by pushing the time button. At this point the product is running and
regulating temperature normally. After a few minutes you will be able to perceive
warmth.
When using an "S" line heating pad, make sure to have adjusted and fastened the pad
correctly onto a specific part of the body. Check that there are no creases or folds.
5) To switch off the product proceed to push the ON/OFF button again. The heating
element remains switched off and only digital dot is lit on the digital display. To turn the
product on push the ON/OFF button once again.
Remember to unplug the product from the mains if you do not use it for a considerable
period of time.
6) Unplug the product and let it cool down before folding it for storage.
OPERATING INSTRUCTIONS
31
EN
ENGlISh