Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Active console after starting an extender
IMPORTANT:
The activation of the
to a second console module are prerequisites for this operation option.
When selecting the
Image display
modules do not show an image after restarting the extender. Only after an input is
made at one console, its image is displayed on the monitor.
The setting
Active console after start
play you want to activate immediately after starting the extender.
How to select whether and on which module the image display is activated after
restarting the extender:
1. Press
Ctrl+Num
2. Select the row
3. Under
Active at startup
none
After restarting the extender, the image display of buth modules
is switched off (default)
After restarting the extender, the image display of the console
remote 1
connected to Transmission 1 is activated
remote 2
After restarting the extender, the image display of the console
connected to Transmission 2 is activated
4. Press
to save your settings.
F2
Related topics:
Changing the time span of the input lock on page 61
Right for exclusive access to the console on page 62
Transm. Redundancy
option
keep off
allows you to define a module whose image dis-
(default) to open the OSD.
and press
System setup
select one of the following options:
feature and the connection
/
(see page 63 f.) both
Permanently off
.
Enter
G&D VisionXS-C-TypeC-UHR · 65
Configuration
Werbung
