Weber Grill Out Bedienungsanleitung Seite 30

30
 Make sure grill is turned off and cool before installing the Weber
 Light should only be mounted to side work surface tables. For non-stationary tables,
remove the light before re-positioning the table.
 Do not mount to hot surfaces.
 Light should not be mounted on or near sideburner or sideburner area. Do not mount
directly to cookbox, kettle or handles.
 Do not bend flexible arm more than 90 degrees in any direction.
 Do not place the Weber Grill Out
®
1
The Weber ® Grill Out ® Table Light bracket can be attached to your grill's side table vertically(a) or
horizontally(b). Follow installation instructions below:
2
a
b
Tighten the large bracket screw
to a point where it's snug, and
then turn a 1/4 turn.
www.weber.com
®
All manuals and user guides at all-guides.com
Table Light directly over cookbox.
®
a
Insert the flexible arm of
lightpod assembly through both
holes of bracket.
Grill Out Table Light.
® ®
b
Tighten the bracket thumbscrew
to a point where it's snug, and
then turn a 1/4 turn.