Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CENTROPIX APP
BUBBLE
This app gives you full control over your
and allows you to customize it optimally to your
needs. Please follow the further instructions to get
BUBBLE
the most out of your
2
.
Downloading the App:
The CENTROPIX app is available in both the App
Store for iOS devices and the Google Play Store for
Android devices. Simply search for „CENTROPIX"
and download and install the app on your smart-
phone or tablet.
11
Standard frequencies (Schumann)
2
BUBBLE
The
2
has four adjustable standard
frequencies, the so-called Schumann frequencies,
which offer you different possibilities and are included
in the purchase price:
7.83 Hz (White LED flashes)
14.10 Hz (Yellow LED flashes)
20.30 Hz (Red LED flashes)
26.40 Hz (Green LED flashes)
To set the frequency and/or intensity on your
open the CENTROPIX app and navigate to the
frequency settings page. Select the desired frequency
by tapping on it or set the intensity (1-3). To transfer
BUBBLE
the new frequency/intensity to your
BUBBLE
the
2
on the inductive charging station. Now
press „Save" in the app. The lower LED on the back
BUBBLE
of the
2
flashes green. Data is transferred
immediately and only takes one to two
BUBBLE
seconds. Now remove the
2
from the charging station and the LED
will flash in the selected „frequency
color".
Frequency intensity
Each frequency is available in three intensity levels
- intensity 1 (low), intensity 2 (medium) and intensity
3 (strong). Please note that the intensity also
influences the power consumption. This means that
if you continuously use high intensity frequency
programs, you will need to charge the battery sooner
than if you use low intensity.
Autopilot
BUBBLE
2
,
The basic package offers fully automatic adjust-
ment of the four powerful Schumann frequencies
and the three intensity levels. The
2
, place
intelligent charging station able to call up the cur-
rent Schumann resonance frequencies on a daily
basis and automatically find the optimum setting
for the day. To do this, simply place your
on the charging station for a few seconds once a
day or as required.
Battery exchange
Turn the cover down clockwise to gain access to
the battery. Carefully pry out the old battery on the
left side using a pointed object (e.g. small screw-
driver). In the same place, insert the new battery
(LIR2032) until it locks securely into place. Close
BUBBLE
the
2
again with the cover, making sure that
the rubber sealing ring is positioned properly.
BUBBLE
2
and its
BUBBLE
2
DE
EN
12
Werbung
