Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Switch on and off
BUBBLE
The
2
cannot be switched on or off manually.
The device operates automatically as long as the
battery is charged.
BUBBLE
To determine the operating status of the
pay attention to the lower light signal on the back.
When the battery is charged, the light signal will
flash every 15 seconds either according to the
default setting or as you set in the app.
BUBBLE
The light signal disappears when the
switches off automatically due to an empty battery
.
(deep discharge protection)
09
General notes
Water resistance of the device
BUBBLE
2
The housing of the
is splash-proof in
accordance with the IPX4 standard. Splash-proof
does not guarantee that no damage will occur in
2
,
direct contact with water.
Cleaning
You can simply clean the housing of the device with
a soft, clean cloth. Please avoid using aggressive or
harsh chemical household cleaners.
2
Disposal
This CENTROPIX product, including all included
parts (such as cables, wires, etc.), complies with
the requirements of Directive 2011/65/EU on the
restriction of the use of certain hazardous substances
in electrical and electronic equipment (RoHS).
Please observe the local regulations when
disposing of the device or the rechargeable battery.
Rechargeable batteries should never be disposed
of with household waste or in an open fire, as there
is a risk of explosion. Ensure that rechargeable
batteries are disposed of properly and in an
environmentally friendly manner.
Light signals
With the BUBBLE2
• Upper blue LED flashes slowly or is off: Battery full
• Upper blue LED lights up: Battery charging
• Lower green LED flashes: Data transmission
BUBBLE
• Lower LED flashes:
2
is active
• Lower white LED flashes: Schumann (7.83 Hz)
• Lower yellow LED flashes: Schumann (14.1 Hz)
• Lower red LED flashes: Schumann (20.3 Hz)
• Lower green LED flashes: Schumann (26.4 Hz)
• Lower pink LED flashes: Schumann frequency
paused
• Lower blue LED flashes: User-defined frequency
• Lower turquoise LED flashes:
User-defined frequency paused
• No light flashes or lights up: Sleeping or
battery empty
With the inductive charging station
- Upper green LED lights up: Charging station is on
- Upper green LED does not light up:
Charging station is off
Change cover
BUBBLE
2
Our
offers not only versatile frequency
options, but also the possibility to customize the
appearance to your style. The scope of delivery
includes a total of 3 different covers (anthracite,
silver, gold), which you can exchange in no time.
Changing the cover is very simple. Turn the current
cover clockwise to remove it from the BUBBLE2
frequency generator. Then simply take the desired
cover and replace it by turning it anti-clockwise.
Please ensure that the rubber ring is properly sea-
ted on the housing before fitting the cover. Ensure
that it ispositioned correctly to guarantee the effec-
tiveness of the seal (splash protection).
Remove cover
Fasten cover
DE
EN
10
Werbung
