Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
!
WARNING
The connection of the
control panel (network and battery disconnected).
NOTE: Before opening the control panel enter the maintenance process in order to avoid the sirens to
sound.
To fit the IP interface on the control panel, insert the card in the space provided and then fasten the
supplied screw/spacer into the hole provided for the purpose.
Plastic box
Metallic box
LED signals
Board reset in Access Point mode:
Board connected to the WiFi/LAN network:
Acquisition network/IP address
Network acquired, in search of Cloud Urmet/certificate
Network acquired, Cloud/certificate acquired
NOTE: Wires with cross-section area of 0.5 mm
crosssection area smaller than 0.5 mm
DS1068-012B
IP
interface module must be performed at the unpowered
Description
2
2
must comply with IEC 60332-2-2.
Led
Connector to be
inserted on the
motherboard.
To the modem/router
2 slow blinks, range 8 sec
2 slow blinks, range 1 sec
3 slow blinks, range 1 sec
3 slow blinks, range 8 sec
or larger must comply with IEC 60332-1-2; wires with
Green LED signaling
Ethernet
Connector
3
Werbung
