Suntek HC-804A Bedienungsanleitung Seite 8

TEST Mode：
In this mode , the screen will light up , and the PIR sensors will be unavailable under
this mode .
1 . You can access setup menu and change configuration according to your own need
and working conditions
2 . You can also use the shot button to manually take a photo or record video
3 . You can press the " Replay " button to playback recorded video and photos .
NOTICE :
This mode is mainly Used for change settings and function test , the PIR sensors will
not be triggered .
ON Mode :
In this mode , the screen is off , and all button operation is not available , the PlR
sensor is in standby and ready to be triggered to rake a photo or record video
Basically you can switch the camera to TEST , and use the button operation to
change setting like time date , the switch it to ON and leave it in the wild field ,
and it will be triggered by passing animals and record any movement for you
NOTICE :
The camera should to be switched from OFF to TEST then ON.Please don' t slide the
power switch from OFF to ON directly
8