Herunterladen Diese Seite drucken

Beko BSSA210K3SN Montageanleitung Seite 21

Vorschau ausblenden Andere Handbücher für BSSA210K3SN:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 151
installation, apply a double pole switch in accordance with
standards which assures the complete disconnection of the
mains under conditions relating to over-current category III, in
accordance with installation instructions.
WARNING!
Before re-connecting the hood circuit to the mains supply and
checking the efficient function, always check that the mains
cable is correctly assembled.
Warning! If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified
persons in order to avoid hazard.
Mounting
Before beginning installation:
Check that the product purchased is of a suitable size for
the chosen installation area.
Remove the charcoal (*) filter/s if supplied (see also
relative paragraph). This/these is/are to be mounted only
if you want lo use the hood in the filtering version.
Check (for transport reasons) that there is no other
supplied material inside the hood (e.g. packets with
screws (*), guarantees (*), etc.), eventually removing
them and keeping them.
Expansion wall plugs are provided to secure the hood to most
types of walls/ceilings. However, a qualified technician must
verify suitability of the materials in accordance with the type of
wall/ceiling. The wall/ceiling must be strong enough to take
the weight of the hood.
Do not tile, grout or silicone this appliance to the wall.
Surface mounting only.
Operation
Model with 5-key keyboard
To select the functions of the hood, simply touch the
commands:
a.
Button to increase suction speed (power):
Suction speed (power) 1
Suction speed (power) 2
Suction speed (power) 3
Note:
suction speed (power) 3 is timed, after
approximately 5 minutes the hood returns to suction
speed (power) 2.
b. Button to decrease suction speed (power).
c.
Button ON/OFF hood
d. Button ON/OFF lighting
e.
Button ON/OFF programmed switching off:
it programs switching off of the active suction speed
(power) after approximately 3 minutes.
Models with mechanical control panel
a.
ON/OFF light switch
b.
Speed 1/OFF switch
c.
2-speed selection
d.
3-speed selection
Models with knob
0
1
2
3
A
B
C
D
17
OFF
Speed 1
Light OFF
Speed 1
Light OFF
Speed 1
Light OFF
Light ON
Speed 1
Light ON
Speed 1
Light ON
Speed 1
Light ON

Werbung

loading