Werbung
WARNING
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
the third-party overclocking tools. Overclocking may affect your system stability, or
even cause damage to the components and devices of your system. It should be
done at your own risk and expense. We are not responsible for possible damage
caused by overclocking.
CAUTION!
1.
FSB1600-CPU will operate in overclocking mode. Under this situation,
PCIE frequency will also be overclocked to 120MHz.
2.
About the setting of "Hyper Threading Technology", please check page
32 of "User Manual" in the support CD.
3.
This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 19 for details.
4.
This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read
the installation guide of memory modules on page 12 for proper
installation.
5.
Please check the table below for the CPU FSB frequency and its
corresponding memory support frequency.
CPU FSB Frequency
1600
1333
1066
800
* When you use a FSB1600-CPU on this motherboard, it will run at
DDR2 960 if you adopt a DDR2 1066 memory module. When you use
a FSB1333-CPU on this motherboard, it will run at DDR2 1000 if you
adopt a DDR2 1066 memory module.
* DDR2 1066 memory module will operate in overclocking mode.
6.
Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
and Windows
®
Vista
TM
64-bit with 64-bit CPU, there is no such limitation.
7.
The maximum shared memory size is defined by the chipset vendor
and is subject to change. Please check Intel
information.
8.
Before installing SATAII hard disk to SATAII connector, please read the "SATAII
Hard Disk Setup Guide" on page 25 of "User Manual" in the support CD to
adjust your SATAII hard disk drive to SATAII mode. You can also connect
SATA hard disk to SATAII connector directly.
9.
Power Management for USB 2.0 works fine under Microsoft
TM
TM
Vista
64-bit / Vista
ASRock P31DE Motherboard
Memory Support Frequency
DDR2 800, DDR2 1066 *
DDR2 667, DDR2 800, DDR2 1066 *
DDR2 667, DDR2 800, DDR2 1066
DDR2 667, DDR2 800
. For Windows
®
XP 64-bit and Windows
®
website for the latest
/ XP 64-bit / XP SP1 or SP2 / 2000 SP4.
®
XP
®
Vista
TM
®
®
Windows
7 7 7 7 7
Werbung
