Werbung
Verfügbare Sprachen
Verfügbare Sprachen
M N XTYLOS
* see at page 10 for other languages
Please read this document carefully and keep it for future reference. CLAY PAKY S.p.A. disclaims any liability for
damage to the appliance or property or injury to third parties resulting from installation, use or service that is not carried
out in accordance with the instructions in this document and in the instruction manual. The instruction manual may be
downloaded from the website www.claypaky.com and must be kept with the appliance. CLAY PAKY S.p.A. reserves the
right to modify the instructions and specifications shown in its documentation at any time without notice.
• Installation
Make sure all parts for fixing the luminaire are in a good state of repair. Make sure the point of anchorage is stable
before positioning the luminaire. The safety chain must be properly hooked onto the fitting and secured to the
framework, so that, if the primary support system fails, the fitting falls as little as possible. If the safety chain gets
used, it needs to be replaced with a genuine spare.
• Photobiological safety
Class 3R Laser product (IEC 60825-1:2014)
• This product includes a light source based on laser diodes. It complies with the requirements of the laser safety
standard IEC 60825-1:2014 (3rd edition).
• This product complies with US Food and Drug Administration (FDA) performance standards for laser products
except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019
• Possibly hazardous optical radiation emitted from this product.
• Do not look at operating source, closer than nominal ocular hazard distance (NOHD). Eye injury may result.
• CAUTION - Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous light exposure.
• All operators are recommended to have completed a simple training course including safety and operation.
• Operators shall control access to the beam within the NOHD or install the product at the height that will prevent
spectators' eyes from being within the NOHD.
• The luminaire is in excess of the maximum permissible exposure (MPE); the viewer-related risk is dependent
upon how the user install and use the product.
• Nominal ocular hazard distance (NOHD): 10m
see operating procedure for more information.
• This Laser Product is designated as Class 3R during all procedures of operation.
• Do not operate with personnel exposure shorter than the declared NOHD distance due to risk of skin or corneal
burns.
• The unit is never to be operated if defective or the covers or seals are damaged.
• The user must not modify the unit or remove protective covers or housings except for service: potentially
hazardous Class 3R Laser light is accessible if service procedures are not followed.
• Service is only to be performed by trained and authorized personnel. Refer to Service Manual for detailed safety
information.
Features
• Wavelength: 455nm, 525nm, 637nm
• Beam divergence: 1°
• Pulse duration and repetition rate : CW
• Maximum power or energy output: 8.7mW
WARNING: Operators shall control access to the beam within the nominal ocular hazard distance NOHD or install
the product at the height that will prevent spectators' eyes from being within NOHD.
1. SAFETY INFORMATION
2
Werbung
