JMA BT MULTIUSER Benutzerhandbuch Seite 14

3 LICENCES
The BT Multiuser system is based on licences. A licence
means a link between the account of a user and a remote
control. A single M-BT remote control can be linked to as
many users as licences it has.
When purchasing the BT Multiuser Pack, the remote control
comes configured with 2 or 4 licences. Additional licence
cards can be acquired subsequently at the points of sale
where the product is sold.
When not purchasing the pack because the user already has
an M-BT remote control, these cards must be purchased
separately and as many licences as required inserted into
the remote control.
These licences can be consulted, added or removed from the
JMARemotesUSER app via the settings menu. The following
26
All manuals and user guides at all-guides.com
screen is displayed when selected "Licences" from the
menu (see next page).
3.1 Add licence
Licence codes may contain 2, 4 or more licences, which
will be installed in the M-BT remote control to which
they are connected. After entering the code in the
corresponding box and pressing "Send", the app will
check whether the code is valid and how many licences
it has.
When confirming the operation, you will need to
select the remote control to which you wish to add the
licences. Once selected, a confirmation message will
be displayed showing the total licences for the remote
control and the licences currently in use.
3.2 Remove licences
This option removes all
the used licences from the
remote control. The users
that were linked to the
remote control will need
to complete the linking
process again.
3.3 Consult licences
This option allows users
to see how many licences
the M-BT remote control
has and how many of
them are in use.
27