JMA BT MULTIUSER Benutzerhandbuch Seite 10

1 SYSTEM START-UP
Starting with an M-BT remote control onto which an original
remote control has already been copied (see M-BT Remote Control
Copy Manual), follow the steps below to start the BT Multiuser
system:
1. Insert the batteries into the BT Multiuser Box
2. Insert the M-BT remote control into the BT Multiuser Box,
connecting the power cable.
3. Download the JMARemotesUSER app and open it.
NOTE: When using an M-BT remote control purchased previously
(black) for use with the BT Multiuser Box, it will need to be
updated to maintain compatibility with the new Multiuser
system. The update process is described in Section 4 and should
be completed wherever the M-BT remote control or BT Multiuser
Box adapter was purchased.
18
All manuals and user guides at all-guides.com
JMARemotesUser
Google Play
App Store
2 USING THE APP
2.1 Registration and
Log In
The first time you open the
BT Multiuser app, you will
need to register.
Registration allows you to
save the remote controls
linked to the system and
configure the open buttons
in a database. This
means you will always
have access to your
configurations regardless
of the terminal on which
the application is installed
in the future.
2.2 Linking Remote
Controls and Open
Button Configuration
Once the user has
registered and logged
in, the "Home" page will
display 4 open buttons and
a lower button marked
"Edit Buttons".
19