Rollei Actioncam 530 Bedienungsanleitung Seite 6

6.WiFi Control
Before using the WiFi Control function, please install the app "Rollei 530-630" to your smartphone or
tablet PC. After turning the camera on, press the WiFi button for 2 seconds and turn on/off the WiFi function.
If WiFi is turned on the WiFi symbol will be shown on the display. If WiFi is turned on, the camera will reset.
WiFi icon becomes green after resetting and waiting for 5 seconds (this expresses that WiFi can be
connected normally now).
Open the WiFi connection at your mobile phone to search for the camera device: AC530 from the available
wireless networks. (Password is1234567890).
3.Start the "Rollei 530-630" software.
7. Remote Control
Start the camera and go to the "Setting Menu". Select "Remote control Pair" and press "OK". The
camera will display "Remote control Pair Start". At the same time, press any key on the remote
control and blue light will start flashing. On the camera screen appears " Pair" and after approximately
20 seconds " remote control Pair Success!", will be displayed on the screen. That means, the connection
is successfully done and the camera turns back to normal mode.
8. How to record videos and configure recording setting
8-1. Video Recording
Switch to recording mode and there will be an icon in the upper left corner of the screen.
Press OK to start recording and the icon will start to flash. Press "OK" again to stop recording and the
icon will disappear.
8-2. Photo Shooting & Setting
Switch the camera on and press "Mode" to select "Photo shooting Mode". The icon in the upper left
corner of the screen shows, that the camera is in the photo shooting mode. Press "OK" to take photos.
All manuals and user guides at all-guides.com
6
EN