Panasonic WV-CF284 Bedienungsanleitung Seite 12

■ Disassembling the Camera
1. Remove the top cover.
• Adjust the marker on this unit to
"INSERT" on the "DOME COVER" label
on the top cover, and turn the top cover
counterclockwise to remove it.
• The clear dome cover and the inner
dome cover are joined into a single unit.
Therefore, never try to remove them.
● To mount the camera directly on
the wall/ceiling
1. Prepare the mounting space.
2. Place the camera onto the wall/ceiling
The mounting requirements are shown as follows.
Mounting Place
Ceiling/wall
■ Connections
● Video output connection
Connect the video output connector to the
monitor, or other system devices, with the
procured coaxial cable.
The maximum extensible cable length is
shown in the table.
12
All manuals and user guides at all-guides.com
Model
(Direct mounting)
and mark four screw positions with a
pen.
3. Mount the camera onto the wall/ceiling
with 4 screws (procured locally).
4. Fasten all of the mounting screws.
Camera mounting screw x4
(not supplied)
● To mount the camera on a two-
gang junction box
1. Install the two-gang junction box onto
the wall/ceiling.
2. Mount the camera onto the two-gang
junction box with 4 screws (procured
locally).
3. Fasten all of the mounting screws.
Recommended Number of
screw screws
M4 4 pcs
46 mm {1-13/16"}
83.5 mm
{3-5/16"}
Minimum pull-
out strength
196 N {20 kgf}