STUDER REVOX B710 MKII Bedienungsanleitung Seite 22

OPERATING INSTRUCTIONS - REPRODUCE
Reproduce of normal recordings without noise reduction
system
- Sct MD'\WOR SWitch
[19]
to TAPE position.
- Set TAPE SELECTOR [18] to the type of tape indicated on the
cassette t=ur cassettes which are coded according to IEC
standards, the AUTO position can be selected in which C<J se
the type of tape can be automatically recogn ized by the re-
corder. I he SWitch position is Indicated
In
the display Window
of the PEAK READING METER [28J.
If the IEC standard is not Slaled on the cassene
JlC J
=
Ferric oxide (Fe2 03)
lEe II
=
Chromium oxide (Cr 02) lEe IV
=
Metal tape
- Insert casset1c.
Grip both Sides of the cassette with one hand and slide into the
cassette compartment whilo pushing gently upwards
- All controls must be set to fully counter-ciockwise to their limit
position (zero positIOn)
- Turn the VOl _ U M E control of the ampl
Ii
18r / rece Ivur to Its coun-
ter-c
ockwise
limit positlo'i (zero position) .
- Depress PLAY key
lb
J .
The PEAK READING METER [28J signals when a rocorded sec -
tion is played back.
- Adjust dusired volume on
~ 'le
ampl.:I() 1
,11
-g
~ E:..D ~
(EeOO
AUTO
- , r- , -
' ; '
.
L-...,--
TAPE SELECTOR
----l
INPIIT lEVEL LINE