Werbung
Verfügbare Sprachen
Verfügbare Sprachen
collection point. For more information see:
www.recyclethis.info.
According to the Batteries and Accumulators
(Placing on the Market) Regulations 2008 and the
Waste Batteries and Accumulators Regulations
2009: This product contains a battery that cannot
be disposed of as unsorted municipal waste in the
United Kingdom. See the product documentation
for specific battery information. The battery is
marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the
battery to your supplier or to a designated
collection point. For more information see:
www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (B)/NMB-003(B)
standards requirements.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement.
This equipment complies with IC RSS-102 radiation
exposure limits set forth for an uncontrolled
environment.
ce matériel est conforme aux limites de dose
d'exposition aux rayonnements, CNR-102 énoncée
dans un autre environnement.
Safety Instruction
These instructions are intended to ensure that user
can use the product correctly to avoid danger or
property loss.
Laws and Regulations
Use of the product must be in strict compliance
with the local electrical safety regulations.
Transportation
Keep the device in original or similar packaging
while transporting it.
Keep all wrappers after unpacking them for
future use. In case of any failure occurred, you need
to return the device to the factory with the original
wrapper.
Transportation without the original wrapper may
result in damage on the device and the company
shall not take any responsibilities.
Do not drop the product or subject it to physical
shock. Keep the device away from magnetic
interference.
Power Supply
The input voltage for the device should meet the
Limited Power Source (5 VDC, 2 A) according to the
IEC61010-1 standard. Please refer to actual
products and technical specifications for detailed
information.
The power source should meet limited power
source or PS2 requirements according to IEC
60950-1 OR ICE 62368-1 standard.
Use the power adapter provided by qualified
manufacturer. Refer to the product specification for
detailed power requirements.
Make sure the plug is properly connected to the
power socket.
DO NOT connect multiple devices to one power
adapter, to avoid over-heating or fire hazards
caused by overload.
Battery
Improper use or replacement of the battery may
result in explosion hazard. Replace with the same or
equivalent type only. Dispose of used batteries in
conformance with the instructions provided by the
battery manufacturer.
Use the battery provided by qualified
manufacturer. Refer to the product specification for
detailed battery requirements.
Make sure the battery temperature is between
0°C to 45°C (32°F to 113°F) when charging.
For long-term storage of the battery, make sure it
is fully charged every half year to ensure the battery
quality. Otherwise, damage may occur.
The built-in battery cannot be dismantled. Please
contact the manufacture for repair if necessary.
Batteries of improper size cannot be installed,
and may cause abnormal shutdown.
The battery cannot be charged with external
power source directly.
Confirm there is no flammable material within 2
m of the charger during charging.
DO NOT place the battery near heating or fire
source. Avoid direct sunlight.
DO NOT place the battery in the reach of
children.
DO NOT swallow the battery to avoid chemical
burns.
Maintenance
If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.
Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
If the equipment is used in a manner not
specified by the manufacturer, the protection
provided by the device may be impaired.
Clean the lens with soft and dry cloth or wiping
paper to avoid scratching it.
It is recommended to reboot the device every 2
hours when using it to ensure the device
performance.
Using Environment
Make sure the running environment meets the
requirement of the device. The operating
temperature shall be -30 °C to 55 °C (-22 °F to
131 °F), and the operating humidity shall be 95% or
less, no condensing.
Place the device in a dry and well-ventilated
environment.
DO NOT expose the device to high
electromagnetic radiation or dusty environments.
DO NOT aim the lens at the sun or any other
bright light.
When any laser equipment is in use, make sure
that the device lens is not exposed to the laser
beam, or it may burn out.
66
Werbung
