Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instruction
probing it directly), through capacitive cou-
pling, the the multi functional auto tester
can seses the high-tension ignigion pulses at
the same time displaya voltage reading. By
monitoring each plug wire in this way you
can locate missing cylinders.
WARNiNg
Do not contact probe tip directly to the
secondary ignition circuit.
Measuring the frequency of the
high-tension ignition pulses
The the multi functional auto tester can
measure the frequency of the high-tension
ignition pulses. Placing the multi functional
auto tester probe tip next to a sparking wire
(DO NOT probing it directly), through capaci-
tive coupling, the the multi functional auto
tester can seses the high-tension ignigion
pulses at the same time displaya frequency
reading.
11
WARNiNg
Do not contact probetip directly to the
secondary ignition circuit.
Peak Detection
The operator can pre-select the peak thresh-
old levels,and then contact a circuit if the
voltage greater than the threshold, you can
hear the alarm audio.
The peak threshold voltage setting loop in-
crementally from 0.5, to 1.0, to 2.0, to 5.0 ,
to 10.0 ,to 48.0 and return back to 0.5 again.
95980781
EN
Technical data:
Werbung
