Hisense RB645N4BFE Bedienungsanleitung Seite 46

Brief introduction
Control panel
Use your appliance according to the
following control regulations, your
appliance has the corresponding functions
and modes as the display panels showed
in the pictures below. When the appliance
is powered on for the first time, the
backlighting of the icons on display panel
starts working. If no buttons have been
pressed and the doors are closed, the
backlighting will turn off.
Controlling the temperature
For optimum food preservation. We
recommend that when you start your
refrigerator for the first time, the temperature
for the refrigerator is set to 4°C. If you want to
change the temperature, follow the
instructions below.
NOTE: HIgh temperature setting will
accelerate food waste.
Caution!
When you set a temperature, you set an
average temperature for the whole
refrigerator cabinet. Temperature inside
each compartment may vary from the
temperature values displayed on the panel,
depending on how much food you store
and where you place them. Ambient
temperature may also affect the actual
temperature inside the appliance.
Fridge
Press ZONE CHOICE
light turns on.
repeatedly until the"
Then press SET TEMP. ,you can set fridge
temperature between 2°C and 8°C as
needed, and display panel will display
corresponding values according to the
following sequence.
8
Freezer
Press ZONECHOICE
light turns on.
Then press SET TEMP. ,you can set freezer
temperature between -14°C and -24°C as
needed, and display panel will display
corresponding values according to the
following sequence.
-14°C
Super Freeze (
Super Freeze will quickly lower the
temperature within the freezer so food will
freeze faster. This can lock in the
vitamins and nutrients of fresh food and
keep food fresh longer.
You can press SUPER to get into super
freezer mode.
When super freeze Mode is selected, the
light will be illuminated and the freezer
temperature will be set at -24°C.
In case of the maximum amount of food to
be frozen, please wait about 24h.
Super freeze automatically switches off
after 52 hours and then the freezer
temperature setting will revert back to the
previous setting.
Eco energy (
This function makes the freezer work in a
power saving mode which is useful for
reducing energy consumption when you
are away.
You can press ECO MODE to get into
economic energy mode.
When economic energy Mode is activated,
the light will be illuminated. The freezer
" temperature will be set at -17°C and the
fridge temperature will be set at 6°C.
repeatedly until
.........
-15°C
-24°C -23°C
)
)
the" "
18