Operation Modes; Notes On Wi-Fi Mode; Playing Music In Ap Mode (Wi-Fi) - auna 10027841 Bedienungsanleitung

The system has three operating modes, namely WIFI Mode, Local Mode and Line-In Mode.
WIFI Mode
There are two possibilities to play music in Wi-Fi Mode:
• AP Mode (Access Point): Smart device will connect directly with the speaker, wifi indicator lighting all the
time(i.e."Direct Connection Mode" in voice prompts)
• STA Mode (Station): Smart devices and speaker are connected with the same router network, the wifi indicator
twinkling(i.e."Being joined wifi network" in voice prompts)
Local Mode
Play TF card or U disk music. It takes 2 -3 seconds to read the data before playing. The WORK indicator will light
when entering into Local Mode.
Line-In Mode
Play audio signals of external devices through the Line-In cable. The AUX indicator will light when entering into
Line-in Mode.
• Playing music via Wi-Fi , smart device and the speaker must join in the same Wi-Fi network.
• Connecting the wifi speaker with the router network( the indicator twinkling),smart devices must join in the
same router wifi network.
• Not using the router,connect smart device directly with the speaker, indicator lighting all the time

Playing Music in AP Mode (Wi-Fi)

• After startup, when you hear „Direct connection mode. Please direct connect or configure wifi", it means the
speaker is in AP Mode.
• Enter into setting interface and turn on WLAN .
• Search for the wifi signal of your wifi speaker and click it.
Operating Modes

Notes on Wi-Fi Mode

10