Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Technical Specifications »PRO IR-202«
Dimensions, Weight
Color
Power Supply
DC Power Input
Sleep/Power Save Mode
Modulation
Carrier Frequencies
Emitter IR Power
Audio inputs
Microphone input
Microphone gain adjust
Microphone channel switch
Audio indicators
Signal-to-Noise Ratio
Frequency Response
Total Harmonic Distortion
Operating Requirements
Mounting Kit
Approvals
Compatible Receivers
L 25,2 cm x B 7,9 cm x H 3,8 cm w/o faceplate or H 6,4 cm
w/faceplate; 0,4 kg
Anthracite
Power supply with IEC line cord, 100-240V AC input, 50-
60Hz, / 24 V DC output at 800 mA
2.5mm ID barrel connector, center positive
Shuts off carrier when no audio is present for 3 minutes
FM Wideband, ±50kHz deviation max, 50 μS pre-emphasis
2.3 MHz (Ch1) and 2.8 MHz (Ch2). Default at power on =
carriers off.
Carriers are automatically enabled upon presence of au-
dio.
0.7 W
RCA jack for Ch1 and Ch2 accept line level, balanced or
unbalanced
audio
Line in balanced/unbalanced switch: selects balanced or
unbalanced line level audio for RCA jacks
3.5 mm, stereo jack with signal and bias connected to tip,
electret microphone compatible (4 VDC bias supply with
2.7k ohm series resistor)
Rotary potentiometer
Selects microphone input to Ch1 or Ch2
Red LED blinks at nominal audio level. One per channel
70 dB, (line input)
95Hz to 17.6kHz, -3dB re 1kHz (line inputs)
125Hz to 17.0KHz, -3dB re 1kHz (microphone input)
<1% (1 kHz, nominal deviation, line or microphone input)
0-50°C
Wall or Ceiling mount bracket, omnidirectional ball-head
clamp,
connecting rods
CE, WEEE, RoHS
RCI-102, IP-112 , PR-20+, PR-22+
English 27
Werbung
