Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Figure 6:
Wiring scheme:
Symmetric Line-Out port (XLR) to »PRO IR-202« RCA Line-In adapter
cable
FEMALE XLR
RED
(IN PHASE)
BLACK (SIGNAL)
1= SHIELD, 2= RED (SIGNAL IN PHASE), 3=BLACK (SIGNAL)
Adjust the Audio Level
Line Level Source
After an audio signal has been connected to the transmitter, adjust the
audio source gain until the »PRO IR-202« audio-level indicator for that
channel blinks periodically.
Microphone Source
Speak into the microphone from a normal distance and at a natural voice
level. Use the microphone gain adjustment on the »PRO IR-202« to set the
gain to the point where the audio level indicator on the selected channel
blinks periodically. If the audio level indicator is always on or on most of
the time, the level is too high. If the audio level indicator is never on, the
level is too low.
24 English
2 CONDUCTOR
WITH SHIELD
BLACK
RCA
RED
(TIP=IN PHASE)
TO »PRO IR-202«
SHIELD NOT CONNECTED
ON »PRO IR-202« CABLE END
Werbung
