Bosch MUMXL20 Gebrauchsanleitung Seite 23

Working with the blender
Press release button and move

multi-function arm to position 5.
Cover unused drives with drive

covers.
Remove the blender drive cover.

Attach blender jug (mark on the handle

on mark on the base unit) and turn all
the way in an anti-clockwise direction.
Add ingredients.

– Maximum amount of liquid ingre-
dients = 1.75 litres;
– Maximum amount of frothing or hot
liquids = 0.75 litres;
– Optimum processing amount of solid
ingredients = 100 grams.
Attach the cover and turn anti-clockwise

all the way into the blender handle.
The cover must be locked in position.
Set the rotary switch to the desired

setting.
Adding more ingredients (Fig.
Switch off the appliance with the rotary

switch.
Remove the lid and add ingredients

or
remove the funnel and gradually add solid

ingredients through the refill opening
or
pour liquid ingredients through the funnel.

Important information
When processing liquids/liquid ingre-
dients, slowly increase the speed of the
appliance in stages to prevent the food
from shooting out.
After using the appliance
Switch off the appliance with the rotary

switch. Wait until the blade has come
to a standstill.
Remove mains plug.

Rotate the blender in a clockwise direc-

tion and remove.
Take the lid off the blender jug.

Rotate the lid in an anti-clockwise
direction and remove.
Clean all parts, see "Cleaning and

servicing".
Tip: It is recommended to clean the blender
immediately after use.
Robert Bosch Hausgeräte GmbH
Cleaning and servicing
Fig. 
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Cleaning the base unit


–8)


Cleaning the bowl and tools
The bowl and tools are dishwasher-proof.
Do not wedge plastic parts in the dishwasher,
as they could be permanently deformed during
the washing process!
Cleaning the blender
Warning!
Do not wash blender holder in the
dishwasher or leave it in water.


Note:
Lid can be disassembled for cleaning.
Fig. 


Important information
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
Risk of electric shock!
Never immerse the base unit in water
or place under running water.
Do not use a steam cleaner.
Remove mains plug.
Wipe the base unit and drive cover with
a damp cloth. If required, use a little
detergent.
Then dry the base unit.
Risk of injury from sharp blades!
Do not touch blender blades with bare
hands. Clean them with a brush.
Clean blender holder under running water.
Lid, funnel and blender jug can be washed
in the dishwasher.
Pull funnel upwards out of the lid.
Press insert downwards out of the lid.
en
23