Herunterladen Diese Seite drucken

Philips GC9635 Benutzerhandbuch Seite 10

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
ENGLISH
12
Problem
Possible cause
The ironing board
Steam has condensed on the
cover becomes wet
ironing board cover after a long
or there are water
ironing session.
droplets on the
garment during
ironing.
You have an ironing board cover
that is not designed to cope
with the high steam rate of the
appliance.
Water droplets come
The steam that was still present
out of the soleplate.
in the hose has cooled down
and condensed into water. This
causes water droplets to come
out of the soleplate.
Steam and/or water
The EASY DE-CALC knob is not
come out from
tightened properly.
under the EASY DE-
CALC knob.
The rubber sealing ring of the
EASY DE-CALC knob is worn.
Storage
1
Switch off the appliance and unplug it.
2
Remove the water tank and empty it.
3
Put the iron on the iron platform. Push the carry lock to lock the
iron onto the platform.
4
Fold the supply hose and mains cord. Put them in their respective
storage compartments.
5
You can carry the appliance with one hand by the handle of the
iron.
Do not carry the appliance by holding the water tank release lever.
Troubleshooting
This chapter summarises the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Centre in your country.
Solution
Replace the ironing board cover if the foam
material has worn out. You can also add an
extra layer of felt material under the ironing
board cover to prevent condensation on the
ironing board. You can buy felt in a fabric
shop.
Put an extra layer of felt material under
the ironing board cover to prevent
condensation on the ironing board. You can
buy felt in a fabric shop.
Steam away from the garment for a few
seconds.
Switch off the appliance and let the
appliance cool down for 2 hours. Unscrew
the EASY DE-CALC knob and screw it back
onto the appliance properly. Note: Some
water may escape when you remove the
knob.
Contact an authorised Philips service centre
for a new EASY DE-CALC knob.

Werbung

loading

Diese Anleitung auch für:

Gc9600 serie