Herunterladen Diese Seite drucken

Grundig Sonoclock 465 Bedienungsanleitung Seite 21

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

| Operating the Radio
|
-
@ In the station memory with numbered positions, you can
store 20 VHF (FM) stations.
@ One of these positions can be assigned to your favourite.
station and stored on the F-S-M button.
© Set the function selector @ .
@ Connect the supplied wire aerial to terminal @8 or an FM
(VHF) aerial system to socket G9, _ _
_In unfavourable reception areas, it is recommended to
connect an aerial system.
Tuning to Stations/ Storing Stations
® Use the PRESET —/+. buttons to select the number of the re-
quired memory position in descending or ascending order.
@ Start the station search with one of the TUNING buttons:
Pressing briefly = tuning in steps;
holding pressed (for more than 2 secs.) = tuning automat-
ically.
<4 = downwards in fenueney
> = upwards in frequency.
After the PRESET —/+ buttons are released, the unit
checks whether the frequency shown has already been
stored.
If this is the case, the number of the memory position will
be shown for 2 seconds and acoustically confirmed.
The display shows the frequency in MHz.
@ Use the STORE button to store the stations in the pre-
selected memory position (will be confirmed by a brief
sound signal).
@ To store your favourite station on the F-S-M button:
— Select the station from U1 — U20 (as already described).
— Press the STORE button and hold, then allocate with the
F-S-M button (will be confirmed by 2 brief sound signals).
> Jee

Werbung

loading