Akrapovic Slip-On Einbauanleitung Seite 10

www.akrapovic.com
3. Position the muffler correctly and slide it onto the outlet side of the link pipe (F 08).
4. Correctly position the carbon-fiber clamp and slide it onto the muffler - bear in mind the left offset of the carbon-fiber
clamp viewed from the rear. Hand tighten the muffler carbon-fiber clamp onto the stock bracket using stock bolt,
washer and nut. Attach the springs (F 09, 10, 11).
IMPORTANT: open the clamp slightly wider than the diameter of the outer sleeve of the muffler – do not
scrape it along the muffler outer sleeve!
F 08
F 09
10 / 18