Storch Power LED FlexLight 120 W Original Bedienungsanleitung Seite 47

4. Device overview and function
1 Operating element
2 Handle
3 Slot for LED lamp
4 LED lamp
5 Cable winder
6 Under the foot, thread for tripod art. no. 60 11 12
5. Commissioning
Unroll the full length of the power cord
from the cord winder (5) and connect
the luminaire to a suitable, earthed plug
socket. The luminaire can be switched on
via the operating element (1).
The luminaire starts at 100% light output.
By pressing the control again, the light out-
put can be set to 50%, and then to 25%.
Pressing again finally turns the luminaire
off again.
The individual LED lamps (4) can be folded
down from the top at an angle of up to 70°
1
2
3
4
5
6
Control light
Operating element
47
GB