Texas A/S Pro Sweep 680 Bedienungsanleitung Seite 14

8. Maintenance
Correct maintenance and lubrication prolongs the lifetime of your machine. Therefore comply
with these instructions.
Consult the manual for the engine for maintaining the engine.
Interval
Part
Check bolts and nuts
Check and fill oil
Change olie
Check cables
Lubricate cables
If you experience any sign of leakage or moisture from the transmission the oil should
9. Troubleshooting
The engine does not start:
The engine runs irregularly
The brushes will not rotate
A ticking sound is audible from the
gear box when the wheels are
activated.
The machine does not sweep
effectively
For every
Every time 20 hours
X
X
X
X
be checked immediately.
Only use original spare parts.
1. Ensure that the sparkplug is not defective.
2. Ensure that the sparkplugcap is fitted
1. Ensure that the choke is deactivated.
2. Ensure that there are no impurities in the
1. Check whether the coupling is adjusted
1. The pin which is described in Section 6
1. Check whether the brush distance to the
For every
50 hours
correctly.
petrol.
correctly
points in the wrong direction. The pin must
always point in the direction of travel.
surface is set correctly.
14
For every For every
100 200 hours
hours
X